Flooring Services

REMOVE & LABEL
£10 s/m
- Investigate the cause and advise accordingly
- Remove damaged floor blocks
- Label and numerate all floor blocks removed
- Clean under the floor
- Clean the floor blocks

APPLY COMPATIBLE COMPOUND
£5 s/m
- Scraping or buffing to remove the material underneath the floor blocks
- Clean the removed material
- Apply compatible compound

FIT BACK OLD FLOOR
£25 s/m

SANDING ENGINEERED FLOOR
£15 s/m
- Use special abrasive for engineered floors to clean the previous substrates of lacquers
- Use a smooth abrasive to give the appropriate finish

SANDING PARQUET FLOOR
£20 s/m
- Assess the situation to see which direction the floor sanding machine needs to start from
- After the floor is cleaned once or twice with a rough granulation it will need to be sanded repeatedly until a fine smooth floor is achieved

2 APPLICATION OF FILLER
£5 s/m
- Vacuum the floor from old dust between the floor blocks
- Apply first layer of filler to ensure that small gaps are covered
- Apply second layer to ensure that larger gaps are covered as well
- On large gaps it might need a third layer

OIL FINISH
£5 s/m
- Prepare floor for first coat of oil
- Apply oil and leave for one or two hours depending on room ventilation
- Apply second coat of oil

LACQUER FINISH
£7 s/m
- Apply Primer to intensify wood color and also give extra protection to your floor
- Wait for around 30 minutes depending on room ventilation
- Apply first layer of lacquer and leave around one or two hours depending on room ventilation
- Buffing the first layer with light abrasives to give the floor a smooth touch
- Cleaning the floor with a Bona T-Pad to ensure all fine particles are removed
- Apply second layer which will be ready for use for light traffic in 2 hours and for its full use from 12 hours depending on what Bona lacquer you choose

STAINING 1-COLOUR FINISH
£11 s/m
- Because a even more smother finish is required we are sanding with an extra finish abrasive
- For the same reason mentioned above we also continue buffing with extra fine abrasives
- Apply color with buffing machine or with special trowel
- It will then be left for 20 minutes and clean with cotton cloth the excess
- We’ll wait for minimum of 8 hours before applying oil finish
- Apply first coat of oil
- We’ll wait for 1 or 2 hours depending on room ventilation before applying second oil cover
- Or option 7 varnishing can be applied

STAINING 2-COLOUR EFFECT FINISH
£14 s/m
- A smoother finish is required so we undertake initial sanding with an extra abrasive finish
- We continue with buffing using extra-fine abrasives
- Prepare floor with first coat of colour
- Apply Bona Rich Tone for a 2-colour effect
- Use both buffing machine and hand depending on desired effect
- Prepare floor for second colour cover
- Apply colour with buffing machine or with special trowel
- It will then be left for 20 minutes and clean with cotton cloth the excess
- Wait for minimum of 8 hours before applying the oil finish
- Apply first coat of oil
- Wait for 1 or 2 hours depending on room ventilation before applying second oil cover
- Option 7 varnishing can be applied instead of oil protection

REFRESH YOUR FLOOR
£10 s/m
- Empty the room of furniture if needed
- Buff the floor using fine abrasives
- Apply fresh coat of lacquer or oil